Diseño de redes de logística inversa: Una revisión del estado del arte y aplicación práctica

  • Luz Ángela Flórez Calderón Universidad Tecnológica de Pereira
  • Eliana Mirledy Toro Ocampo Universidad Tecnológica de Pereira
  • Mauricio Granada Echeverry Universidad Tecnológica de Pereira
Palabras clave: logística inversa, modelos de programación matemática, técnicas de solución, recuperación y valorización, residuos

Resumen

Este artículo presenta una revisión de diferentes modelos de programación matemática y técnicas de solución, aplicadas en la solución de problemas de diseño de redes de logística inversa, en donde se describen las principales contribuciones y se comparan varios tratamientos, modelos y algoritmos de solución. Adicionalmente, se ha desarrollado una aplicación al caso específico de la gestión de llantas fuera de uso en las ciudades de Pereira y Dosquebradas (Colombia), evaluando las alternativas que existen en la recuperación y valorización de este tipo de residuo, con el fin de incurrir en el menor costo posible y/o generar beneficios para la Región.

Biografía del autor/a

Luz Ángela Flórez Calderón, Universidad Tecnológica de Pereira
Ingeniera Industrial, Investigadora, Universidad Tecnológica de Pereira, Pereira, Colombia
Eliana Mirledy Toro Ocampo, Universidad Tecnológica de Pereira
Ingeniera Industrial, M.Sc., Profesor asociado, Facultad de ingeniería industrial, Universidad Tecnológica de Pereira, Pereira, Colombia
Mauricio Granada Echeverry, Universidad Tecnológica de Pereira
Ingeniero Eléctrico, M.Sc, Ph.D. Profesor asociado, Facultad de Ingeniería Eléctrica, Universidad Tecnológica de Pereira, Pereira, Colombia

Descargas

La descarga de datos todavía no está disponible.

Biografía del autor/a

Luz Ángela Flórez Calderón, Universidad Tecnológica de Pereira
Ingeniera Industrial, Investigadora, Universidad Tecnológica de Pereira, Pereira, Colombia
Eliana Mirledy Toro Ocampo, Universidad Tecnológica de Pereira
Ingeniera Industrial, M.Sc., Profesor asociado, Facultad de ingeniería industrial, Universidad Tecnológica de Pereira, Pereira, Colombia
Mauricio Granada Echeverry, Universidad Tecnológica de Pereira
Ingeniero Eléctrico, M.Sc, Ph.D. Profesor asociado, Facultad de Ingeniería Eléctrica, Universidad Tecnológica de Pereira, Pereira, Colombia

Referencias Bibliográficas

Pokharel S., and Mutha A., (2009). Perspectives in reverse logistics: A review. In: Resources, Conservation and Recycling, Vol. 53, pp. 175–182. http://dx.doi.org/10.1016/j.resconrec.2008.11.006

Fleischmann M., Bloemhof-Ruwaard J.M., Dekker R., Van Der Laan E., Van Nunen Jo A.E.E and Van Wassenhove L., (1997). Quantitative models for reverse logistics: A review. In: European Journal of Operational Research, Vol. 103, pp. 1-17. http://dx.doi.org/10.1016/s0377-2217(97)00230-0

Bloemhof-Ruwaard J. M., Van Beek P., Hordijk L. and Van Wassenhove L. N., (1995). Interactions between operational research and environmental management. In: European Journal of Operational Research, Vol. 85, pp. 229-243. http://dx.doi.org/10.1016/0377-2217(94)00294-m

Listes O., (2007). A generic stochastic model for supply and return network design. In: Computers & Operations Research, Vol. 34, pp. 417-442. http://dx.doi.org/10.1016/j.cor.2005.03.007

Du F., and Evans G., (2008). A bi-objective reverse logistics network analysis for post-sale service. In: Computers & Operations Research, Vol. 35, pp. 2617-2634. http://dx.doi.org/10.1016/j.cor.2006.12.020

Dehghanian F., and Mansour S., (2009). Designing sustainable recovery network of end of life products using genetic algorithm. In: Resources, Conservation and Recycling, Vol. 53, pp. 559-570. http://dx.doi.org/10.1016/j.resconrec.2009.04.007

Figueiredo J.N., and Mayerle S.F., (2008). Designing minimum cost recycling collection networks with required through put. In: Transportation Research Part E, Vol.44, pp. 731-752. http://dx.doi.org/10.1016/j.tre.2007.04.002

Hesse M., and Rodrigue J.P., (2004).The transport geography of logistics and freight distribution. In: Journal of Transport Geography, Vol.12, pp. 171-184. http://dx.doi.org/10.1016/j.jtrangeo.2003.12.004

Rogers D.S., and Tibben Lembke R.S., (1998). Going Backwards: Reverse Logistics Trends and Practices. Reverse Logistics Executive Council, Tesis Doctoral. Reno Center for Logistics Management. University of Nevada. 275 p.

Rubio S., (2003). El sistema de logística inversa en la empresa: análisis y aplicaciones. Tesis Doctoral, Departamento de economía aplicada y organización de empresas, Universidad de Extremadura. Badajoz, 289 p.

Ortega M., (2008). Utilización de métodos cuantitativos para el análisis de problemas de localización en logística inversa. Tesis Doctoral. Departamento de Ingeniería de Organización, Administración de Empresas y Estadística. Escuela Técnica Superior de Ingenieros Industriales. Universidad Politécnica de Madrid. Madrid, 276 p.

Winston W.L., (2005). Investigación de operaciones. Aplicaciones y algoritmos. Cuarta edición. México D.F. International Thomson editores S.A.

Thierry M., Salomon M., Van Nunen J., and Van Wassenhove L. (1995). Strategic Issues in Product Recovery Management. In: California Management review, Vol. 37, pp. 114-135. http://dx.doi.org/10.2307/41165792

Spengler T., Piichert H., Penkuhn T., and Rentz O., (1997). Environmental integrated production and recycling management. In: European Journal of Operational Research, Vol. 97, pp. 308-326. http://dx.doi.org/10.1016/s0377-2217(96)00200-7

Barros A., Dekker R. and Scholten V., (1998). A two-level network for recycling sand: A case study. In: European Journal of Operational Research, Vol. 110, pp. 199-214. http://dx.doi.org/10.1016/s0377-2217(98)00093-9

Cruz R., and Ertel J., (2009). Reverse logistics network design for the collection of End-of-Life Vehicles in Mexico. In: European Journal of Operational Research, Vol. 196, pp. 930-939. http://dx.doi.org/10.1016/j.ejor.2008.04.041

Srivastava S.K., (2008). Network design for reverse logistics. En: Omega, Vol. 36, pp. 535- 548. http://dx.doi.org/10.1016/j.omega.2006.11.012

Fan Wang H., and Weihsu H., (2010). A closed-loop logistic model with a spanning-tree based genetic algorithm. In: Computers & Operations Research, Vol. 37, pp. 376-389. http://dx.doi.org/10.1016/j.cor.2009.06.001

Frota Neto J. Q., Bloemhof-ruwaard J. M., Van Nunen J.A.E.E., and Van Heck E., (2008). Designing and evaluating sustainable logistics networks. In: Int. J. Production Economics, Vol. 111, pp. 195-208. http://dx.doi.org/10.1016/j.ijpe.2006.10.014

Hu T.L., Sheu J.B., and Huang K.H., (2002). A reverse logistics cost minimization model for the treatment of hazardous wastes. In: Transportation Research Part E, Vol. 38, pp. 457-473. http://dx.doi.org/10.1016/S1366-5545(02)00020-0

Lu Z., and Bostel N. (2007). A facility location model for logistics systems including reverse flows: The case of remanufacturing activities. In: Computers & Operations Research, Vol. 34, pp. 299-323. http://dx.doi.org/10.1016/j.cor.2005.03.002

Yongsheng Z., and Shouyang W., (2008). Generic Model of Reverse Logistics Network Design. In: Journal of transportation systems engineering and information technology, Vol. 8(3), pp. 71-78. http://dx.doi.org/10.1016/S1570-6672(08)60025-2

Jayaraman V., Patterson R.A., and Rolland E., (2003). The design of reverse distribution networks: Models and solution procedures. In: European journal of Operational Research, Vol. 150, pp. 128-149. http://dx.doi.org/10.1016/s0377-2217(02)00497-6

Gomes M.I., Barbosa A.P. and Novais A.Q., (2007). An optimization model for the design of a capacitated multi-product reverse logistics network with uncertainty. In: European Journal of Operational Research, Vol. 179, pp. 1063-1077. http://dx.doi.org/10.1016/j.ejor.2005.05.032

Pishvaee M.S., Rabbani M., and Torabi S.A., (2011). A robust optimization approach to closed-loop supply chain network design under uncertainty. In: Applied Mathematical Modelling, Vol. 35, pp. 637-649. http://dx.doi.org/10.1016/j.apm.2010.07.013

Sheu J.B., Chou Y.H., and Hu Ch., (2005). An integrated logistics operational model for green-supply chain management. In: Transportation Research Part E, Vol. 41, pp. 287-313. http://dx.doi.org/10.1016/j.tre.2004.07.001

Schultmann F., Zumkeller M., and Rentz O., (2006). Modeling reverse logistic tasks within closed-loop supply chains: An example from the automotive industry. In: European Journal of Operational Research, Vol. 171, pp. 1033-1050. http://dx.doi.org/10.1016/j.ejor.2005.01.016

Van Der Laan E., (1997). The effects of remanufacturing on inventory control. Tesis Doctoral. Rotterdam, Paises Bajos. Erasmus University Rotterdam.

De Brito M.P. and Dekker R., (2003). Modelling product returns in inventory control: exploring the validity of general assumptions. In: Int. J. Production Economics 81–82, pp. 225-241. http://dx.doi.org/10.1016/s0925-5273(02)00275-x

De Brito M.P., (2003). Managing Reverse Logistics or Reversing Logistics Management. Tesis Doctoral. Erasmus University Rotterdam. Erasmus Research institute of Management (ERIM).

De Brito, M.P. and Van der Laan E.A. (2009). Inventory control with product returns: The impact of imperfect information. In: European Journal of Operational Research, Vol. 194, pp. 85-101. http://dx.doi.org/10.1016/j.ejor.2007.11.063

Lieckens K. and Vandaele N., (2005). Reverse logistics network design with stochastic lead times. En: Computers & Operations Research.

Zerhouni H., Gayon J.P. and Frein Y., (2010). Influence of dependency between demands and returns in a reverse logistics system. In: Int. J. Production Economics.

Gou Q., Liang L., Huang Z., and Xu C., (2008). A joint inventory model for an open-loop reverse supply chain. En: Int. J. Production Economics, Vol. 116, pp. 28-42. http://dx.doi.org/10.1016/j.ijpe.2008.07.009

Zhao Q., Chen S., Leung S., and Lai K.K., (2010). Integration of inventory and transportation decisions in a logistics system. In: Transportation Research Part E, Vol. 46, pp. 913-925. http://dx.doi.org/10.1016/j.tre.2010.03.001

Krikke H., (1998). Recovery strategies and reverse logistic network design. Tesis Doctoral. Institute for Business Engineering and Technology Application (BETA); University of Twente. Países Bajos, 264 p.

Krikke H., Van Harten A., and Schuur P., (1999). Business case roteb: recovery strategies for monitors. In: Computers & Industrial Engineering, Vol. 364, pp. 739–757. http://dx.doi.org/10.1016/s0360-8352(99)00163-1

Kongar E., (2003). Multiple Criteria Decision Making Techniques for End-Of-Life Product Recovery. Tesis Doctoral. Northeastern University. Boston, EEUU.

Kara S., Rugrungruang F., Kaebernick H., (2007). Simulation modelling of reverse logistics networks. In: Int. J. Production Economics, Vol. 106, pp. 61–69. http://dx.doi.org/10.1016/j.ijpe.2006.04.009

Kenne J.P., Dejax P., and Gharbi A., (2009). Production planning of a hybrid manufacturing remanufacturing system under uncertainty within a closed loop supply chain. In: Int. J. Production Economics.

De la Fuente M.V., Ros L., and Cardo M., (2008). Integrating Forward and Reverse Supply Chains: Application to a metal mechanic company. In: Int. J. Production Economics, Vol. 111, pp. 782–792 http://dx.doi.org/10.1016/j.ijpe.2007.03.019

De la Fuente M.V., Ros L., and Ortiz A., (2010). Enterprise modelling methodology for forward and reverse supply chain flows integration. In: Computers in Industry, Vol. 61, pp. 702–710. http://dx.doi.org/10.1016/j.compind.2010.05.010

Mutha A., and Pokharel S., (2009). Strategic network design for reverse logistics and remanufacturing using new and old product modules. In: Computers & Industrial Engineering, Vol. 56, pp. 334–346 http://dx.doi.org/10.1016/j.cie.2008.06.006

Shi J., Zhang G., and Sha J., (2011). Optimal production planning for a multi-product closed loop system with uncertain demand and return. In: Computers & Operations Research, Vol. 38, pp. 641–650. http://dx.doi.org/10.1016/j.cor.2010.08.008

Trappey J.C., Trappey A., and Wub Ch.V., (2010). Genetic algorithm dynamic performance evaluation for RFID reverse logistic management. In: Expert Systems with Applications, Vol. 37, pp. 7329–7335 http://dx.doi.org/10.1016/j.eswa.2010.04.026

Min H., Ko H.J., and Ko Ch., (2006). A genetic algorithm approach to developing the multiechelon reverse logistics network for product returns. In: Omega, Vol. 34, pp. 56 – 69 http://dx.doi.org/10.1016/j.omega.2004.07.025

Lee D.H., and Dong M., (2009). Dynamic network design for reverse logistics operations under uncertainty. In: Transportation Research Part E, Vol. 45, pp. 61–71. http://dx.doi.org/10.1016/j.tre.2008.08.002

González Torre P.L., Adenso Díaz B., and Artibab H., (2004). Environmental and reverse logistics policies in European bottling and packaging firms. In: Int. J. Production Economics, Vol. 88, pp. 95–104. http://dx.doi.org/10.1016/S0925-5273(03)00181-6

Chen H.K., Chou H.W., and Chiu Y.Ch., (2007). On the modeling and solution algorithm for the reverse logistics recycling flow equilibrium problem. In: Transportation Research Part C, Vol. 15, pp. 218–234. http://dx.doi.org/10.1016/j.trc.2007.05.001

Amini M.M., Retzlaff Roberts D., and Bienstock C.C., (2005). Designing a reverse logistics operation for short cycle timerepair services. En: Int. J. Production Economics, Vol. 96, pp. 367–380. http://dx.doi.org/10.1016/j.ijpe.2004.05.010

Rodríguez J.A., and Vidal C.J., (2009). A heuristic method for the inventory control of short life-cycle products. En: Ingeniería y Competitividad, Vol. 11, No. 1, pp 37-55.

Monroy N., and Ahumada M.C., (2006). Logística Reversa: Retos para la Ingeniería Industrial. In: Revista de Ingeniería, Vol. 23, pp. 23-33.

Hanke J.E. and Wichern D.W., (2006). Pronósticos en los negocios. Cap. 4. 8 ed. México. Promedio móviles y métodos de suavizamiento. Pearson educación.

Cómo citar
Flórez Calderón, L. Ángela, Toro Ocampo, E. M., & Granada Echeverry, M. (2012). Diseño de redes de logística inversa: Una revisión del estado del arte y aplicación práctica. Ciencia E Ingeniería Neogranadina, 22(2), 153-177. https://doi.org/10.18359/rcin.424
Publicado
2012-12-01
Sección
Artículos